Bring the presenter into the studio along the right side of the room.
Plug in the HDMI cable from the presenter laptop into Input 2 on theswitcher.
The camera should already have the HDMI cable running into Input 1 on the switcher.
Make sure the wireless mic receiver is charged, powered on and plugged into Mic 1on the switcher.
Press theOnbutton for Mic 1 on the switcher.
Make sure you see that the HDMI Input 1 and 2 are lit upon the switcher,and you should also see the feed from the camera and the laptop on the right studio monitorat the desk to confirm the feed is coming in properly.
Power On one of the wireless lapel transmittermics andhave the presenter clip the mic facing up toward their face, as high on their shirt as possible.It's best if the mic can be tucked away and not seen on the presenter, if possible, but not a deal breaker.
Do a mic checkwith the presenter. You should see the micfeedindicator going up and down on the right studio monitorATEM control displaywhen speaking.
Have the presenter login to their email and/or OneDriveand download their slides to the laptop local hard drive.
Have presenter open PowerPoint and bring up their slides.
Since PowerPoint will detect a second monitor, have the presenter go into Presenter Mode. Presenter can read from their PPTX presenter notes if they choose, as those notes will not be recorded.
Double check that just the slides(not the notes) are being received by the switcher.
Put a “Recording in Progress” sign on the door then make sure the door to the studio is closed.
Silence all alerts on the studio Mac and presenter laptop and remind presenter to silence cell phone.
